mechanical coupling malaysia

What is Mechanical Coupling Malaysia

mechanical couplings Malaysia

What is Mechanical Coupling Malaysia?

Mechanical Couplings Malaysia used to connect rotating shafts of a driver and a driven piece of equipment. Mechanical Coupling are used to connect the shaft of an electric motor to a pump. They used to connect an engine to a compressor. Let’s take a look at how many types of Mechanical Couplings Malaysia has.

Click For Adapting With The Factory Automation System

Type of Mechanical Coupling Malaysia

mechanical couplings Malaysia
  1. Rigid Coupling
    Rigid Coupling is used when the two shafts are aligned. They are suitable to close aligned
  2. Sleeve or Muff Coupling
    Muff or sleeve coupling is the simplest type of rigid coupling. They used for transmits low to medium torque between connected equipment in shear
  3. Compression Coupling
    The sleeve is made into two halves and is bolted together. They are used widely in heavy-duty speeds
  4. Flange Coupling
    Flange Coupling is a sort of connector between turning chutes that have two arrangements of flanges. They were used in pressurized piping systems where two pipes or tubing closes need to meet up.
  5. Flexible Coupling
    Flexible Coupling is to transmit power (torque) from one shaft to another. They are used to connect two shafts that have both lateral and angular misalignment
  6. Bushed Pin-Type Coupling
    They are a type of Power Transmission Mechanical Coupling that has been used to connect two shafts together at their ends. That is for the purpose of transmitting power.
  7. Universal Coupling
    Universal coupling or universal joint is a joint or coupling connecting rigid shafts whose axes are inclined to each other. They have been used widely in the transmission of power.
  8. Oldham Coupling
    This coupling has been used where two shafts have a lateral misalignment. Oldham Coupling is a form of flexible coupling designed for applications that must be free from backlash.
  9. Gear Coupling
    This Coupling was used to join two shafts at their finishes. Gear coupling is also a modified version or an updated version of the flange coupling.
  10. Bellow Coupling
    Bellow Coupling is one form of flexible coupling with twin coupling ends called hubs. They are used to couple driving and driven shafts in mechanical power transmission assemblies.
  11. Jaw Coupling
    Jaw Coupling used for general purpose power transmission it is also used in motion control applications. They are for transmitting torque while damping system vibrations and accommodating misalignment, which protects other components from damage.
  12. Diaphragm Couplings
    This coupling consists of one or more metallic membranes which are attached at the outside diameter of a drive flange and transfers torque radially through the diaphragm to an inside diameter attachment.
  13. Fluid coupling
    This coupling is a hydrodynamic or ‘hydrokinetic’ device used to transmit rotating mechanical power. They used to transmit rotating mechanical power.